WELCOME:
-
Forster CO-AX PRESS
R9942,00Co-Ax® Reloading Press
The simplest, most powerful, and most accurate press on the market, bar none.
CONFIRM STOCK AVAILABILITY
-
-
FORSTER Full Length Bushing
R2513,00The Bushing Full Length Sizing Die offers advanced precision by allowing you to precisely control the amount of neck sizing tension in your reloaded brass while sizing the body and bumping the shoulder.
Confirm Stock Availability
-
FORSTER Full Length Sizing Die
R1330,00 – R4333,00Because they offer maximum flexibility, most reloaders start their collection of Bench Rest® dies with full length sizers. The die sizes the case neck and body, sizes shoulder to set headspace (length), deprimes, and expands the case neck.
Machined by hand with one-piece reamers. The exclusive elevated “E-Z” out expander ball system makes the difference in this sizing die.
Full Length Dies are available in more than 70 calibres, either individually or bundled with a seater die in the Bench Rest Die Set.
Confirm Stock Availability
-
FORSTER INSPECTOR COAX CASE AND CARTRIDGE
R2933,00Accurate performance from your ammunition is absolutely dependent on uniformity of both the bullet and the case. Achieving that uniformity is not possible without an accurate, reliable measuring device. The Forster exclusive Co-Ax Case & Cartridge Inspector provides you with the ability to ensure uniformity by measuring three critical dimensions: neck wall thickness, case neck concentricity, and bullet runout.
Measurements are in increments of one-thousandth of an inch so accuracy is superb. The Inspector is unique because it checks both the bullet and case alignment in relation to the centerline (axis) of the entire cartridge or case.
Pilots sold separately. (The .17 caliber pilot is not compatible with this tool.)
Confirm Stock Availability
-
FORSTER Neck Bushing
R350,00 – R403,00Bushings allow case necks to be sized to your exact requirements in a Bushing Bump Neck Sizing Die.
An ultra smooth bushing produces better loaded rounds, so Forster uses a super-cooling cryogenic process. Cryogenically treated steel produces filler particles that refine and close the steel’s surface.
Bushings are heat treated and honed to the precise inside diameter stated.
Confirm Stock Availability
-
FORSTER Neck Reamer
R588,00 – R700,00Thick case necks can cause high chamber pressures and flyers. The Forster Neck Reamer mounts in the cutter of a Forster Case Trimmer in place of the pilot and removes the excess brass from the neck walls.
Confirm Stock Availability
-
FORSTER Neck Sizing Die
R840,00The Forster Bench Rest® Bushing Bump Sizing Die brings you an advanced level of precision by allowing you to precisely control the amount of bullet tension in your reloaded cartridges. A one-step neck sizing reduction/shoulder bump operation keeps your case necks straighter.
This die improves accuracy and prolongs case life because the body of your case maintains its fire-formed “glove” fit to your rifle’s chamber. At the same time it “bumps” the shoulder of the case to maintain excellent case neck concentricity. Best of all, it prevents overworking the neck and allows you to control the amount of neck tension for your bullet seating operation.
Interchangeable bushings are available in 0.001 in. increments to enable custom neck sizing and fine adjustments for case neck wall thickness. Forster neck bushings are machined to a superior interior finish for “smooth as silk” neck sizing. Order bushings separately.
Confirm Stock Availability
-
FORSTER Neck Tension Gauge
R1058,00Use the Neck Tension Gauge (NTG) as an inspection tool to quickly and accurately screen/sort a batch of brass before your bullet seating operation.
The NTG provides reloaders with the information needed to create exacting neck tensions during the bullet seating operation.
- Use after case neck sizing and before bullet seating to help determine optimal inside neck diameter for consistent release of a bullet from your reloaded rounds.
- Allows for inspection of the inside diameters of case necks to be sure a “donut” has not formed at the neck-shoulder junction.
Confirm Stock Availability
-
FORSTER ORIGINAL CASE TRIMMER
R3480,00Forster Original Case Trimmer is the only Case Trimmer that holds the case in a Brown & Sharpe-type collet – keeping your trimming depth consistent, even when the rim diameter varies.
Confirm Stock Availability
-
FORSTER POWDER FUNNEL WITH LONG TUBE
R462,00This funnel and 5¼″ long drop tube combination can add from three to eight more grains of powder to your load, depending on the specific case you’re using. The Powder Funnel cleanly fills cases without any need to compress the charge during bullet seating.
The momentum of the powder dropping down the tube results in a larger volume by weight, so it’s not necessary to compress the charge.
The funnel works best with slow-burning powders when full capacity loads are desired. Works for a large range of cartridge cases starting with 223 Rem up to 375 H & H.
Confirm Stock Availability
-
Forster Primer Feed Tubes LARGE
R231,00The tube bottoms against the flat surface of the primer housing in the Co-Ax Primer Seater. The bottom of the tube must be funneled in slightly for proper functioning.
For several reasons, the tube is made of a light, soft material which may be bent, filed or trimmed with a penknife. The slot in the tube also permits visual inspection to determine if any primers are reversed.
Confirm Stock Availability
-
Forster Primer Seater Assembly
R322,00Co-Ax Reloading Press spare or replacement Primer Seater Assembly.
Confirm Stock Availability
-
FORSTER PRIMER TUBE LOADER
R392,00Aligns primers anvil-side up and mates with the Primer Feed Tube for quick loading in the Co-Ax Primer Seater.
The Primer Tube Loader aligns all primers with just a few flicks of the wrist. With a little practice, you can go from the primer box, to Primer Tube Loader, to Primer Feed Tube in as little as eight seconds!
Confirm Stock Availability
-
FORSTER Seating Stem for Seater Die
R308,00Replacement seating stem for Bench Rest Seater Die.
This part is not interchangeable with the Ultra™ Micrometer Seater Die Seating Stems.
Confirm Stock Availability
-
FORSTER Seating Stem for Ultra Die
R308,00Replacement seating stem for Ultra Micrometer Seater Die.
This part is not interchangeable with the Standard Bench Rest Seater Die Seating Stems.
Confirm Stock Availability